Tedlar Bags
| Size | Liters | Poly 2 in 1 Valve | Teflon Nut | Roberts Valve | Roberts & Jaco Dual Fit |
| 6 x 6 | 0.5 | $12.00 | $12.00 | $14.00 | $15.25 |
| 7 x 7 | 1 | $12.00 | $12.00 | $14.00 | $15.25 |
| 9 x 9 | 2 | $14.50 | $12.50 | $14.50 | $17.00 |
| 10 x 10 | 3 | $15.00 | $13.00 | $15.00 | $18.00 |
| 12 x 12 | 5 | $17.00 | $13.50 | $16.00 | $18.25 |
| 12 x 18 | 10 | $19.00 | $15.50 | $18.00 | $26.25 |
| 18 x 18 | 16 | $21.25 | $19.00 | $21.25 | $31.75 |
| 18 x 24 | 25 | $25.25 | $23.00 | $25.25 | $37.00 |
| 24 x 24 | 40 | $36.75 | $34.00 | $38.75 | $46.50 |
| 24 x 30 | 50 | $40.00 | $35.50 | $38.00 | $48.00 |
| 24 x 36 | 60 | $48.50 | $46.00 | $48.50 | $55.50 |
| 30 x 30 | 75 | $48.50 | $46.00 | $48.50 | $51.25 |
| 30 x 36 | 100 | $51.25 | $48.50 | $51.25 | $56.25 |
| 36 x 36 | 125 | $55.25 | $51.25 | $55.25 | $61.25 |
| 48 x 48 | 250 | $70.75 | $62.75 | $70.75 | $72.25 |
Tedlar bags are the bag of choice by most professionals for collecting a wide variety of gaseous compounds. Tedlar bags are used for many EPA methods such as methods 3,18 and 40. Tedlar is inert to most gases, resists gas permeation and can be reused after proper cleaning. We carry 2 mil. clear Tedlar sampling bags. Our standard fitting is a polypropylene 2-in-1 valve with septa. We also offer polypropylene Jaco fitting, nickel plated brass Halkey-Roberts twist on/off valve, Delrin 500 Luerlock valve, and Teflon nut to accommodate Swagloc fittings and the Jaco valve.
What are Tedlar bags?
Tedlar® bags are made from a polyvinyl fluoride (PVF) film that is tough, durable, and chemically inert to a wide range of compounds. Bags used in environmental applications typically have a 2 mil film thickness and are applicable for a wide temperature range (98-225 °F). The bags have heat sealed, leak-proof seams and can be used to collect both liquid and air samples. This versatility allows the bags to be used for a variety of applications. Applications include: stack sampling, vent/flue sampling, soil gas sampling, TCLP extractions, calibration gas blending and preparation of standards, indoor air sampling, and ground water testing.
What are Tedlar bags used for?
Tedlar bags are most commonly used for calibration test standards and sampling of both indoor and outdoor hazardous and non-hazardous gases.
Tedlar® bags are made from a polyvinyl fluoride (PVF) film that is tough, durable, and chemically inert to a wide range of compounds. Bags used in environmental applications typically have a 2 mil film thickness and are applicable for a wide temperature range (98-225 °F). The bags have heat sealed, leak-proof seams and can be used to collect both liquid and air samples. This versatility allows the bags to be used for a variety of applications. Applications include: stack sampling, vent/flue sampling, soil gas sampling, TCLP extractions, calibration gas blending and preparation of standards, indoor air sampling, and ground water testing.
What are Tedlar bags used for?
Tedlar bags are most commonly used for calibration test standards and sampling of both indoor and outdoor hazardous and non-hazardous gases.
